Change User Password
When the MFP Local Authentication feature is used, administrators can change the authentication password assigned for
each user in case the user forgets the password.
Press [CHANGE USER PASSWORD] in the ADMIN menu.
1
The CHANGE USER PASSWORD screen is displayed.
To display the ADMIN menu, see the following page:
P.63 "Entering Admin Menu"
[CHANGE USER PASSWORD] is available only when the MFP Local Authentication feature is enabled. For
more information about enabling this feature, refer to the COMMAND CENTER Guide.
2
Set a new password.
1) Press [USER NAME] to enter the user name for which the password is to be changed.
2) Press [NEW PASSWORD] to enter the new password.
3) Press [RETYPE NEW PASSWORD] to enter the new password again.
4) Press [OK] to save the new password.
When you press each button ([USER NAME], [NEW PASSWORD] and [RETYPE NEW PASSWORD]), the
on-screen keyboard is displayed. Enter a value using the keyboard and digital keys, and press [OK] to set
the entry.
The input password appears as asterisks (*) in the [NEW PASSWORD] and [RETYPE NEW PASSWORD]
boxes.
2 SETTING ITEMS (ADMIN)
Change User Password
135