Chapter 4 Basic Operation; Basic Copying Procedure - Kyocera KM-1530 Instruction Handbook Manual

CHAPTER 4 BASIC OPERATIONS

1. Basic copying procedure

1
1. Warm-up
Turn the main switch ON (|). When warm-up ends, the Start indicator
lights.
* If you set an original and press the Start key before warm-up ends,
copying automatically starts at the end of warm-up.
2
2. Setting originals
Set the original on the platen. When setting the original, adjust its
position using the original size scales based on the left rear position.
3
3. Function selection
Select from the various function of the copier.
* See pages 4-3 to 5-6 for details about the copy functions.
4-1
4
4. Paper size selection
When copying onto paper of the same size as the original, check that
the APS indicator is lit. If not, press the auto mode selection key to
light the indicator. When copying onto paper of a different size from
the original without changing the size of the image, press the Paper
Select key for the desired paper size and press the Manual key.
* The copier can be set so that the paper size is always to be set
manually. (See "Paper selection" on page 6-5.)
* A drawer (paper feed drawer) to be selected automatically without
setting any originals can be specified. (See "Default drawer" on
page 6-5.)
5
-1
5. Copy quality selection
Copy quality can be selected according to the original type. Press the
image mode selection key to light the respective indicators.
To adjust automatically: Auto Exposure indicator
Photo originals: Photo indicator
Text and photo originals: Text & Photo indicator
Text originals: Text indicator
* The copy exposure can be adjusted in all image modes. (See "Auto
exposure adjustment", "Text and photo original exposure adjust-
ment", "Text original exposure adjustment" and "Photo original
exposure adjustment" on pages 6-4 and 6-5.)
* The image mode used in the initial mode can be selected. (See
"Exposure mode" on page 6-4.)