Host Properties - HP StorageWorks MPX200 User Manual

NOTE:
HP recommends that you set a static IP address on the management port to ensure connectivity.
After the discovery is complete, the MPX200s appear in the iSCSI Devices folder as iSCSI Controller
01 and iSCSI Controller 02. The four iSCSI MPX200 hosts appear in the Hosts folder (see Figure 21).
The ports associated with each host consist of the VPGs from each blade.
Figure 21 Host properties
.
In the IPv4 or IPv6 box, select Static and set the management port IP address.
Figure 22 shows the Management Port tab on the iSCSI Controller Properties page.
38 Managing the MPX200 using HP Command View EVA