Laser Safety Warning; Certification And Classification Information; Laser Product Label; Class 1 Laser Product Label - HP StorageWorks MPX200 User Manual

Laser safety warning

WARNING!
To reduce the risk of exposure to hazardous radiation:
Do not try to open the laser device enclosure. There are no user-serviceable components inside.
Do not operate controls, make adjustments, or perform procedures to the laser device other than
those specified herein.
Allow only HP authorized service technicians to repair the laser device.

Certification and classification information

This product contains a laser internal to the fiber optic (FO) transceiver for connection to the Fibre
Channel communications port.
In the US, the FO transceiver is certified as a Class 1 laser product conforming to the requirements
contained in the Department of Health and Human Services (DHHS) regulation 21 CFR, Subchapter
J. A label on the plastic FO transceiver housing indicates the certification.
Outside the US, the FO transceiver is certified as a Class 1 laser product conforming to the requirements
contained in IEC 825 1:1993 and EN 60825 1:1994, including Amendment 11:1996 and
Amendment 2:2001.

Laser product label

The optional label in
device.
Figure 117 Class 1 laser product label
.
This optional label indicates that the product is classified as a CLASS 1 LASER PRODUCT. This label
may appear on the laser device installed in your product.
262 Regulatory compliance and safety
Figure 117 or equivalent may be located on the surface of the HP supplied laser