Table of Contents
Advertisement
The printer automatically advances the continuous paper from
the standby position to the loading position when it receives
data.
Using the Micro-Feed Feature
The micro-feed feature allows you to move paper forward or
backward in 1/180-inch increments, so you can finely adjust
the printing and tear-off positions.
Adjusting the printing position
The printing position is the position on the page where the
print head actually prints during a print job. You can change
the current vertical printing position temporarily by using the
micro-feed feature as described in the steps below.
Note:
Your printing position setting is in effect only until the next time you
load paper or turn off the printer.
1. Make sure the printer is turned on.
2. Press the Pause button to stop printing. The Pause light
comes on.
3. Press the d button to feed paper forward or the u button to
feed paper backward.
4. When your paper is positioned correctly, press the Pause
button to resume printing.
3-38
Paper Handling
Advertisement
Table of Contents
