Serial Interface Specifications; Optional Cut-Sheet Feeder Specifications - Epson DLQ-3000+ User Manual

Serial Interface Specifications

Synchronization:
Handshaking:
Signal level:
Handshaking:
Baud rate:
Connector plug:
Data format:

Optional Cut-Sheet Feeder Specifications

The specifications below apply to the optional cut-sheet feeder (C80683
Note:
You can load the same types of single sheets, single-sheet multi-part forms,
envelopes, and postcards in the cut-sheet feeder as you can load in the front or
rear paper guide. For paper specifications, see page A-4.
Capacity:
Single sheets
A3 size paper
Other paper
Single-sheet multi-part
forms
Envelopes
Postcards
Asynchronous
Handshaking by DTR signal or XON/XOFF.
EIA-232D
Mark logical "1" ( 3 V to 25 V)
Space logical "0" (+3 V to +25 V)
Handshaking by DTR signal and XON/XOFF.
300, 600, 1200, 2400, 4800, 9600, or 19200 bps
EIA 25-pin sub-miniature D-shell
connector (female)
1 start bit
Data word length: 8 bits
Odd, even, or no parity
1 stop bit
Up to 130 sheets of 82 g/m
Up to 170 sheets of 64 g/m
Up to 200 sheets of 82 g/m
Up to 250 sheets of 64 g/m
Up to 40 sheets of 47 g/m2 (12.5 lb) paper
Up to 20 plain or bond envelopes
Up to 30 airmail envelopes
Up to 50 plain paper cards
]
2
(22 lb) paper
2
(17 lb) paper
2
(22 lb) paper
2
(17 lb) paper
A-19
Specifications
A
).