Table of Contents
Advertisement
If you are not sure whether you need an optional interface or
would like to know more about interfaces, contact your dealer.
Installing an interface card
Follow the steps below to install an optional interface card.
1. Make sure the printer is turned off. Unplug the printer's
power cord and disconnect the interface cable.
2. Remove the screws securing the shield plate to the back of
the printer and remove the plate.
3. Slide the interface card along the slots on both sides of the
interface compartment. Firmly push in the card to make
sure the connector at the back of the card is fully inserted
into the printer's internal socket.
6-12
Using Printer Options
Advertisement
Table of Contents
