Table of Contents
Advertisement
The printer's page length
setting may not match the
size of the paper you are
using.
Paper is jammed inside the
printer.
Single sheets loaded from the optional cut-sheet feeder
The platen rotates but the cut-sheet feeder does not feed the
paper.
Cause
The cut-sheet feeder is
installed incorrectly.
The paper release lever is set
to the tractor position.
The right and left paper
guides are too close to the
paper stack, preventing the
paper from feeding smoothly.
Paper is jammed inside the
printer.
There are only a few sheets of
paper left in the bin.
You may have loaded too
many sheets in the bin.
Check the "Page Tractor" setting using
SelecType or the EPSON Remote!
utility. See "SelecType" on page 4-8, or
"Using the printer utilities" on page
2-22.
Clear the paper jam as described on
page 8-24.
What to do
Reinstall it correctly. See "Installing
the cut-sheet feeder" on page 6-2.
Set the paper release lever to the
single-sheet position. (See "Setting the
paper release lever" on page 3-4.)
Adjust the paper guides to match the
width of your paper.
Clear the paper jam as described on
page 8-24.
Add more paper.
Remove some sheets. See page A-19
for information on the types and
quantity of paper that can be loaded
with the cut-sheet feeder.
Troubleshooting
8
8-15
Advertisement
Table of Contents
