Overlapping Multi-Part Forms - Epson DLQ-3000+ User Manual

Overlapping multi-part forms

This kind of continuous paper provides you with multi-part
forms. The page length of the multi-part forms is longer than
that of the backing continuous paper. So when extended, one
page's multi-part forms overlap the next page's multi-part
forms as shown below. The thickness of this overlapping area
is thicker than the printable area.
Caution:
c
Use overlapping multi-part forms only under normal
operating conditions.
Loading overlapping multi-part forms
1. Make sure of the following:
Your software settings keep the printing entirely within
the printable area. For information about the printable
area, see the paper specifications on page A-12 and
A-13.
The paper release lever is set to the tractor position.
The setting in Page Tractor in SelecType 1 matches the
page length of the form you use.
Note:
In Overlapping Form and
automatically activates the AUTO paper thickness function even
though the paper thickness lever may be set to another position.
modes, the printer
Paper Handling
3
3-29