The following table provides guidelines for selecting the
appropriate lever position for the type of paper you use.
Paper type
Ordinary paper (single sheets or
continuous paper)
Multi-part forms (carbonless)
2 parts (original plus + 1 copy)
3 parts (original plus + 2 copies)
4 parts (original plus + 3 copies)
5 parts (original plus + 4 copies)
6 parts (original plus + 5 copies)
7 parts (original plus + 6 copies)
Labels
Envelopes
Postcards
*Continuous forms with labels
Overlapping multi-part forms
*Overlapping multi-part forms with labels
* For this paper, make the thickness settings using the EPSON Label
Form Utility. See page 2-23, for instructions on accessing the utility.
Caution:
c
Do not set the paper thickness lever to AUTO when using
labels whose backing sheet is exposed. Set it to the appropriate
position according to the table above.
Note:
In Overlapping Form and
operates on AUTO function even though the paper thickness lever
may be set to another position.
3-6
Paper Handling
Paperthickness
lever position
0 or 1
2
3
5
6
7
9
2 or 3
5 to 9
3
Auto
Auto
Auto
modes, the printer automatically