Table of Contents
Advertisement
printer driver
A software program that sends commands from the computer for using
the functions of a particular printer.
reset
To return a printer to its defaults settings.
resolution
A measure of the amount of detail that can be represented. Resolution
of printed images is measured in number of dots per inch (dpi).
SelecType
A setting mode used to control various printer functions or set the default
status of the printer when it is turned on or initialized.
self test
A method for checking the operation of the printer. When you run the
self test, the printer prints the characters stored in its ROM (Read Only
Memory).
tear off
A control panel button that feeds the perforation of continuous paper
to the tear-off position and then feeds the paper back to the top-of-form
position.
tear-off position
The position the printer feeds the paper to when you press the
Tear Off button or when auto tear-off mode is on. Using the micro adjust
feature, you can adjust the position so that the paper's perforation meets
the printer's tear-off edge.
top-of-form position
The position on the paper that the printer recognizes as the first printable
line. This is the default top-margin position.
unidirectional printing
Printing in which the print head prints in one direction only.
Unidirectional printing is useful for printing graphics because it allows
precise vertical alignment. You can select unidirectional printing in the
printer's SelecType mode or the EPSON Remote! utility. See also
bidirectional printing.
4
Glossary
Advertisement
Table of Contents
