Table of Contents
Advertisement
The cut-sheet feeder feeds more than one sheet at a time.
Cause
You may have loaded too
many sheets in the bin.
Sheets of paper are stuck
together.
Paper feeding is crooked.
Cause
The right and left paper
guides are too far apart.
The paper is old or creased.
You may not be using the
right type of paper for the
cut-sheet feeder. For example,
your paper may be too heavy
or too light.
When the printer ejects the paper, the Paper Out flashes and
the Pause light comes on.
Cause
The printer has not fully
ejected your paper.
8-16
Troubleshooting
What to do
Remove some sheets. See page A-19
for information on the types and
quantity of paper that can be loaded
with the cut-sheet feeder.
Remove the paper stack, fan it, and
then reload it.
What to do
Position the paper guides to match the
width of your paper.
Use only new, clean sheets of paper.
Make sure your paper meets the
requirements of your printer and
cut-sheet feeder. See the paper
specifications and the optional
cut-sheet feeder specifications on page
A-19.
What to do
Remove the paper by hand; the Paper
Out light goes out. Press the Pause
button to resume printing.
Advertisement
Table of Contents
