Micro Feed; Using Micro Feed - Epson 5000/5500 User Manual

Micro Feed

The micro-feed feature allows you to move the paper forward or
backward in l/180-inch increments. You can use this feature to
the
adjust loading and tear-off positions.
When you make adjustments to the loading or tear-off positions
with continuous paper,
even if you turn off the printer.
When you adjust the loading position of single-sheet paper, the
printer remembers the new position until you turn off the power.
The loading position returns to the factory setting when the power
is turned on again.

Using micro feed

To use the micro-feed feature, you press the
time as you press the
the printer's control panel. To use the micro-feed feature, follow the
steps below:
1. Make sure printing has stopped.
2. While holding down the
button to feed the paper forward or the
paper backward, as indicated by the arrows above the bottons.
the
printer remembers the new position,
LOAD/EJECT
or
ALT
button, press
ALT
button at the same
LF/FF
button, as indicated on
the LOAD/EJECT
LF/FF
button to feed the
Using the Printer
3-13