Micro-Feed
The micro-feed feature allows you to move the paper forward or
backward in 2/216-inch increments. You use this feature to adjust
the loading and tear-off positions, as well as the print position
during a print job.
When you make adjustments to the loading or tear-off positions for
continuous paper, the printer remembers the new setting even if you
turn off the printer. The printer automatically advances the paper to
the new position when the power is turned on again.
When you adjust the loading position for single-sheet paper, the
printer remembers the new position only until you turn off the
power. The loading position returns to the factory setting when the
power is turned on again.
Adjusting the print position
Follow the steps below to adjust the print position during a print
job:
1.
PAUSE
Press the
2. While holding down the
enter the micro-feed mode. The
blink alternately.
button to stop printing.
ALT
button, press the
FONT
PAUSE
CONDENSED
and
Using the Printer
button to
lights
3-15