Table of Contents
Advertisement
3. Slide the right paper guide so that its edge is even with the
guide mark on the cut-sheet feeder and push back the lever
to lock the paper guide in place. Next, slide the left paper
guide to roughly match the width of your paper.
4. Slide the center support midway between the paper guides.
5. Fan a stack of paper then tap the sides and bottom of the
stack on a flat surface to even it up. See page A-19 for
information on the types and quantity of paper that can be
loaded with the cut-sheet feeder.
Caution:
c
Do not use labels in the cut-sheet feeder.
Using Printer Options
6
6-7
Advertisement
Table of Contents
