Table of Contents
Advertisement
Checking and changing printer driver settings
Before printing, check that the printer driver settings are
appropriate for the kind of document you want to print, and
change settings as needed. When you are finished making
changes, click OK to apply the settings, or click Cancel to
cancel your changes.
If you accessed the printer driver from your application, some
of the settings below may appear in your application's Page
Setup dialog box. If you accessed the driver from the Control
Panel, these settings appear in the printer driver settings
window.
Resolution
Paper Size
Paper Source
Orientation
To access the following settings from your application, you
may need to click Printer, Setup, Options, or some
combination of these buttons. If you accessed the driver from
the Control Panel, click Options to access these settings.
Dithering
2-12
Setting Up Your Software
Click the printing resolution you want.
Select the size of the paper loaded in
the printer. If you don't see your
paper size, use the scroll bar to scroll
through the list. If your paper size is
not included in the list, click User
Defined Size and enter the paper size
in the dialog box that appears.
Click the paper source you want to
use.
Select Portrait or Landscape. The
diagram on the screen changes
according to the orientation you select.
You can leave this option set to Fine,
which is the default setting, or select
another dithering pattern depending
on the kind of printout you want.
Advertisement
Table of Contents
