Paper Handling - Epson DLQ-3000+ User Manual

The electrical outlet is out of
order.

Paper handling

Single sheets loaded from the paper guide
The printer does not load single-sheets of paper.
Cause
Continuous paper is in the
paper path.
The paper release lever is set
to the tractor position.
The platen does not rotate and the printer does not feed the
paper.
Cause
The paper on the paper guide
is positioned too far to the left
or right for the paper sensor
to detect it.
Plug another electrical device, such as
a lamp, into the outlet to check if the
outlet is working properly. If it is not,
use a different outlet.
What to do
Press the Load /Eject button to
remove the continuous paper. Set the
paper release lever to the single-sheet
position and insert a new sheet. (See
page 3-23 for information on removing
continuous paper.)
Set the paper release lever to the
single-sheet position. (See "Setting the
paper release lever" on page 3-4.)
What to do
Move the paper a little to the left or
right.
Troubleshooting
8
8-9