Table of Contents
Advertisement
Tear Off
Press this button to feed continuous paper to the tear-off
position. Press it again to feed the paper backward to the
loading position.
Note:
You can turn on the auto tear-off feature using SelecType. For more
information, see "SelecType" on page 4-8.
u and d
Press these buttons briefly to advance and reverse the loaded
paper in 1/180-inch increments, and continuously to move the
paper further. You can also use these micro-feed buttons to
adjust the tear-off and printing positions. When you are in the
SelecType mode, use these buttons to select the next or
previous feature or option in the mode. For more information,
see "SelecType" on page 4-8.
l and r
Press these buttons in SelecType mode to enter and exit the
feature and option menus. For more information, see page 4-8.
Pitch
Press this button in SelecType mode to select character pitch.
For more information, see "SelecType" on page 4-8. Be aware
that the pitch in your software overrides this setting.
Reset
Press the Pause and Load/Eject buttons simultaneously to
reset or initialize the printer.
4-6
Controlling the Printer
Advertisement
Table of Contents
