Setting Up The Printer - Epson C82362 Administrator's Manual

Setting Up the Printer

This section explains about the system requirements of Printer
Status Page and how to set up the printer. The standard port
monitor that comes with Windows 2000 connects a Windows 2000
print server to network-interface printers that use the TCP/IP
protocol. You must install the Internet Protocol (TCP/IP) on the
server and set the printer for TCP/IP. See "Windows 2000" on
page 2-5 to install Internet Protocol (TCP/IP).
The environmental requirements for Printer Status Page are;
Server and client
Internet Information Service (IIS) is installed in Windows
2000. To check whether IIS is installed, double-click the Add/
Remove Programs icon in the Control Panel, click the Add/
Remove Windows Components button, and then click the
Components button. In the Windows Components dialog
box, see if the Internet Information Service (IIS) is checked.
If not, check and install it.
Internet Explorer 4.01 or higher installed.
The computer is connected to the network and TCP/IP is
correctly set.
Printer
You need to set up the printer that you want to manage with
Printer Status Page.
1. Make sure the printer is connected to the network, and TCP/
IP is correctly set for the printer.
2. Install the printer driver using the Add Printer wizard. When
you install EPSON printer driver for Windows 2000, Printer
Status Page is also installed. See "Printing via Standard TCP/
IP Port Monitor in Windows 2000" on page 6-2 and following
notes to install a printer driver.
Printer Status Page Utility
13
13-3