Table of Contents
Advertisement
5. Click the TCP/IP tab to display the TCP/IP menu.
Note:
The network administrator must confirm any changes made to the
IP address settings.
6. Select the "Get IP address" method from the following list:
Auto, DHCP, BOOTP, RARP, or Manual.
Note:
The default is Auto. When Auto is selected, DHCP, BOOTP,
and RARP are available.
To use RARP, BOOTP, or DHCP, a server for each protocol is
necessary. If there is no server which corresponds to the
protocol, do not use it. See your server documentation for
setting details.
If there are no DHCP, BOOTP, or RARP servers on your
system or on your network, the interface card uses
"192.168.192.168" as the default IP address.
2-14
Setting the IP Address
Advertisement
Table of Contents
