Environment For Epson Status Monitor 2 - Epson C82362 Administrator's Manual

Environment for EPSON Status Monitor 2

Protocols
The protocols that must be installed to run EPSON Status Monitor
2 vary depending on your operating system and printer type. The
following table divides printers into four categories: Local
printers; LPR printers, which use TCP/IP (generally in a
Windows NT network environment); NetWare printers, which
use Novell's IPX/SPX protocol in a NetWare environment; and
Windows shared printers. Use the table below to determine what
protocols you need to install according to your operating system
and printer type, then see the appropriate section for your
operating system.
Windows 98
Windows 95
Windows 2000
Windows NT 4.0
Windows NT
3.51
1
EPSON LPR
2
LPR
= Windows NT LPR protocol
3
NetWare
= Necessary protocols already installed
11-2
EPSON Status Monitor 2 (Windows only)
Local
Printer
LPT
LPT
LPT
Not
available
= EpsonNet Direct Print
LPR Printer NetWare
(TCP/IP) Printer
(IPX/SPX)
1
EPSON LPR NetWare
1
EPSON LPR NetWare
TCP/IP & NetWare
2
LPR
TCP/IP & NetWare
2
LPR
Windows
Shared
Printers
3
LPT
3
LPT
3 2
LPR & LPT
3 2
LPR & LPT