Configuring the interface card using EpsonNet WinAssist
You can use the interface card with the default setting for
NetBEUI. If you want to change the default setting, use EpsonNet
WinAssist or WebAssist. The default values for NetBEUI are as
follows;
Items
NetBIOS name
Workgroup name
Device name
To configure the interface card for NetBEUI, follow the steps
below.
Note:
TCP/IP or IPX must be installed on your computer.
1. Turn on the printer with the interface card.
2. Run EpsonNet WinAssist from the Start menu.
3. Select the printer you want to configure from the list, then
click Configuration or double-click the printer.
Default values
EPxxxxxx
Workgroup
EPSON
Using the Interface Card with Windows 98/95
5
5-3