DIP switch
There is a DIP switch on the board of interface card models
C82363 and C82364 . The interface card automatically selects
the interface mode if it is set to AUTO. We recommend you use
the AUTO setting.
If you need to manually set the interface mode with the DIP
switch, refer the following table.
Mode
AUTO
100BASE-TX interface
(Full Duplex)
100BASE-TX interface
(Half Duplex)
10BASE-T interface
(Half Duplex)
Position of the switch
AUTO
MANUAL, 100M, FULL
MANUAL, 100M, HALF
MANUAL, 10M, (either FULL or HALF)
Dip switch
1-5
Getting Started
1