Chapter 14
Troubleshooting
General Problems
Cannot configure the interface card or cannot print from the
network.
Cause
Printer settings or network
settings may be wrong.
Unable to start EpsonNet WinAssist.
Cause
You have added or deleted
protocols after installing
EpsonNet WinAssist.
What to do
First, check if you can print a status
sheet by pressing the status sheet
button, as described in Chapter 1.
If not, set the interface mode of the
printer's control panel to Auto or
Option. If you can print a status sheet,
check the network settings.
What to do
Uninstall EpsonNet WinAssist and
reinstall it.
Troubleshooting
14
14-1