Table of Contents
Advertisement
Workgroup name:
Enter the workgroup name or domain name (up to 15
characters) used for the Windows network environment.
Device name:
Enter the device name (up to 12 characters). LPT1, LPT2,
LPT3, and COM cannot be used.
5. After making the settings, click OK. The Password dialog box
appears.
6. Enter your password (up to 20 characters) and click OK to
save settings. If you are entering a password for the first time,
click Change and set the password. For more information
about passwords, see "About passwords" on page 9-7.
Follow the on-screen instructions. After updating is complete,
refresh the configuration by selecting Refresh from the View
menu.
c
Caution:
Since it takes 2 or 3 minutes to send new settings to the
interface card, you must wait until the on-screen message
appears before turning off your printer.
Using the Interface Card with Windows 98/95
5
5-5
Advertisement
Table of Contents
