Epson C82362 Administrator's Manual page 181

TCP/IP
Items
Get IP Address
Set by PING
IP Address
Subnet Mask
Default Gateway
SUBMIT button
AppleTalk
Items
AppleTalk
Printer Name
Entity Type
Zone Name
Network Number Set
Network Number for
Manual Mode
SUBMIT button
Explanations
Select the method of acquiring the IP
address; Manual, RARP, BOOTP, or DHCP.
Select ON when setting the IP address
using ping command.
Enter the IP address for the interface card
if set to Manual.
Set the subnet mask.
Set the gateway address if needed.
Update the changes.
Explanations
Enable or Disable AppleTalk.
Enter the name of the printer attached
to the interface card (up to 32
characters).
Displays the Entity type of the printer
attached to the interface card. If you are
using a Level 1 printer, enter the entity
type.
Enter the AppleTalk zone.
Select Auto or Manual. It should usually
be set to Auto.
Enter the network number when you
select Manual for Network Number Set.
Update the changes.
The EpsonNet Configuration Utility
9
9-23