Table of Contents
Advertisement
4. Select Properties from the control menu, then click the
Output Port tab.
5. From the Output Port list box, select one from \PIPE\LPD0
to \PIPE\LPDn (where n is the maximum number of LPD
ports). The \PIPE\LPD -Settings dialog box will appear.
6. Enter the IP address of the interface card in the LPD server
box. Enter the printer name set in step 2 in the LPD printer box.
7. Close the Printer icon to exit printer configuration.
7-4
Using the Interface Card with OS/2
Advertisement
Table of Contents
