Changing The Ip Address Using Epsonnet Webassist - Epson C82362 Administrator's Manual

Changing the IP Address Using EpsonNet WebAssist

After you have configured the interface card for TCP/IP using
EpsonNet WinAssist, MacAssist, or the arp/ping commands, you
can make changes to the IP address or other settings using
EpsonNet WebAssist (a utility that runs on your browser).
Note:
A web browser must be installed in your computer.
TCP/IP must be correctly set for the computer and interface card.
Do not operate EpsonNet WinAssist/MacAssist and EpsonNet
WebAssist for the printer at the same time.
There are some restrictions on the characters you can use depending
on your browser. For details, see your browser or OS
documentation.
Follow the steps below to change the IP address using EpsonNet
WebAssist.
1. Turn on the printer with the interface card.
2. Run EpsonNet WebAssist using one of the methods described
below.
Run EpsonNet WinAssist or EpsonNet MacAssist. Click
the printer you want to configure from the list and click
the Launch Browser button.
Open your browser, and type in the IP address of the
interface card directly. Do not run EpsonNet WinAssist
or MacAssist.
URL: http:// the IP address of the interface card/
Example: http://192.168.100.201/
2-20
Setting the IP Address