Table of Contents
Advertisement
Port Number:
Enter the port number of the proxy server.
Get Printer Attributes:
When you select this box and click OK, EpsonNet Internet
Print communicates with the printer to acquire information,
so it may take a few minutes before a message appears. This
setting is available only when creating a port.
Get status every 20 sec.:
Select this box when you want to receive printer status
updates at regular intervals (every 5 seconds during printing
and every 20 seconds when idle). If you select this box, a
message will appear if an error occurs during printing. You
can also check the printer status by double-clicking the printer
icon.
OK button:
Saves the settings.
Cancel button:
Cancels any changes.
Note:
The settings can be changed after setting up the printer. In the
printer's Properties dialog box, click the Ports tab, and click the
Configure Port button to change the settings.
Be aware that if you connect to the Internet using a dial-up
router and select the Get status every 20 sec check box, you
may be charged for an extra line connection.
When you select the Get Printer Attributes check box and
click OK, an error message might appear. Be sure that the
printer's power is on, and the printer is connected to the
network.
12-12
EpsonNet Internet Print Utility
Advertisement
Table of Contents
