4. The IP Address Configuration and AppleTalk Configuration
dialog box appears.
Note:
See "Setting the IP Address Using EpsonNet WinAssist/
MacAssist" on page 2-12 for more information about setting the IP
address.
5. Set the following options in the AppleTalk Configuration box.
Printer Name:
Enter the printer name (up to 32 characters). The default name
is shown below.
Level 1 printer: Epson-xxxxxx
Level 2 or 3 printer: Printer product name-xxxxxx
(xxxxxx are last 6 digits of the serial number)
Using the Interface Card with Macintosh
4
4-3