Printing Via Lpr Port In Windows Nt 4.0; Printing Via Lpr Port In Windows Nt 3.51 - Epson C82362 Administrator's Manual

Printing via LPR port in Windows NT 4.0

When using the printer on a TCP/IP network in Windows NT 4.0,
follow the steps below to connect the network printer to your
computer using the LPR port.
Setting up your printer
1. Make sure the printer is turned on.
2. Click Start, point to Settings, and then click Printers.
3. Double-click the Add Printers icon, and click the My
Computer radio button, then click Next.
4. Click Add Port in the Add Printer Wizard dialog box.
5. Select LPR Port from the Available Printer Port list, and click
the New Port button.
Note:
You cannot use the Lexmark TCP/IP Network Port with this
interface card.
6. Enter the IP address of the interface card in the first text. Click
OK to return to the Printer Ports dialog box.
7. Follow the on-screen instructions to install the printer driver.
Note:
If the Wizard asks you whether to select Keep existing driver or
Replace existing driver, be sure to select the Replace existing
driver radio button.
Using the Interface Card with Windows 2000/NT
6
6-5