Configuring The Interface Card Using Epsonnet Winassist6-13 - Epson C82362 Administrator's Manual

Configuring the interface card using EpsonNet WinAssist
You can use the interface card with the default setting of NetBEUI.
If you want to change the default setting, use EpsonNet WinAssist
or WebAssist. The default values for NetBEUI are as follows;
Items
NetBIOS name
Workgroup name
Device name
To configure the interface card for NetBEUI, follow the steps
below.
Note:
TCP/IP or IPX must be installed on your browser.
1. Turn on the printer with the interface card.
2. Start EpsonNet WinAssist.
Windows 2000/NT 4.0: Click Start, point to Programs,
EpsonNet WinAssist, then click EpsonNet WinAssist.
Windows NT 3.51: Double-click the EpsonNet WinAssist icon
in the EpsonNet WinAssist group.
Default values
EPxxxxxx
Workgroup
EPSON
Using the Interface Card with Windows 2000/NT
6
6-13