Using Bindery Print Server (Netware 3.1X/4.1X); Configuring For Netware Using Epsonnet Winassist - Epson C82378 Administrator's Manual

Using Bindery Print Server (NetWare 3.1x/4.1x)

This section contains instructions on using the network adapter
in Print Server mode under NetWare 3.1x/4.1x/IntranetWare
with Bindery emulation.

Configuring for NetWare using EpsonNet WinAssist

Configure the network adapter using EpsonNet WinAssist.
Note:
The Novell Client32 or Novell IntranetWare Client must be installed in
your computer. Do not use Novell Client for Windows 95/98 version
3.00 or Novell Client for Windows NT version 4.50.
1. Turn on the printer with the network adapter.
2. From any NetWare client, log in to the target NetWare server
with supervisor privileges. You must log in with bindery
connection.
3. Run EpsonNet WinAssist from the Start menu.
Settings for NetWare
4-5