Configuring The Print Server Using Epsonnet Winassist; Easysetup - Epson C12C824052 (Internal Type-B 10/100Base-T High Speed Ethernet Print Server User Manual

Configuring the Print Server Using EpsonNet
WinAssist EasySetup
You can also use EpsonNet WinAssist EasySetup to easily
configure the print server ready for TCP/IP and Microsoft
Network printing within a short time.
Note:
The computer to use for the following steps must be in the same
segment as the print server.
When you assign an IP address manually, we recommend you use
EpsonNet WinAssist to set the subnet mask and default gateway.
If EpsonNet WinAssist is installed on your computer, you can also
run EpsonNet WinAssist EasySetup from the Start menu. Click
Start, point to Programs or All Programs (Windows XP/Server
2003), and then select EpsonNet WinAssist V4. Click EpsonNet
EasySetup to start it. Then go to step 5 below.
Follow the steps below to configure the print server using
EpsonNet WinAssist EasySetup.
1. Turn on the printer.
2. Insert the Software CD-ROM in the CD-ROM drive.
3. The EPSON Installation Program starts automatically.
If the Installer dialog box does not appear, double-click
SETUP.EXE on the CD-ROM.
4. Select EpsonNet WinAssist Easy Setup, and then click
5. The EpsonNet WinAssist Easy Setup dialog box appears.
Click Next.
6. Read the License Agreement and then click Next.
76
EpsonNet WinAssist Configuration Utility
.