Address Pool Attributes - Fujitsu ServerView Resource Orchestrator Cloud Edition V3.1.0 User Manual

VLAN Type
The VLAN type is displayed.
-
When used as Tagged VLAN
"tagged" is displayed.
-
When used as Untagged VLAN
"untagged" is displayed.
-
When VLAN is not used
"none" is displayed.
Status of virtual switch automatic configuration
The following information is displayed when automatic network configuration has been performed on the target of network resource
automatic configuration or when a VM host on which automatic network configuration has been performed exists in the cluster.
Cluster Group
The cluster is displayed.
VM host name
The VM host name is displayed.
VM Type
The VM Type (VMware or Hyper-V) is displayed.
-
VMware
-
Hyper-V
Virtual Switch / Port Group
When the VM type is VMware, the virtual switch and port group names are displayed.
When it is Hyper-V, the virtual network name is displayed.
A hyphen ("-") is displayed in the following cases.
-
When the same configuration that is to be configured automatically has been created by the user beforehand.
-
When a configuration change made by the user with VM management software after automatic configuration is detected by
this product.
A.6.21 Address Pool Attributes
General Area
Name (Label)
The name of the resource is displayed.
Type
The type of the resource is displayed.
Label
The label set for the resource is displayed.
Comments
Comments set for the resource are displayed.
Priority
The priority of the address pool is displayed.
- 338 -