Re-Discovering Lan Switches; Modifying Network Resource Specifications - Fujitsu ServerView Resource Orchestrator Cloud Edition V3.1.0 User Manual

2.
To use this feature, the following settings must first be defined:
VLAN
Select "Change" and select the VLAN ID that has been changed.
Physical Port, Link Aggregation
Select [None] from the VLAN type of the port number to delete VLANs or link aggregation group name.
3.
Click <OK>.
The VLAN ID is deleted.

7.4.3 Re-discovering LAN Switches

Newly added LAN switches can be discovered by re-executing LAN switch discovery.
For details on LAN switch discovery, refer to "Discovery" in
Note
When using "auto-configuration for network device" function on a LAN switch, register it as a network device using the method described
in "5.7 Registering Network

7.5 Modifying Network Resource Specifications

This section explains how to modify specifications of network resources.
The availability of modification for each item depending on the network resource type is shown below:
Table 7.1 Modification Availability Range List
Category
Network resource name
General Area Label
Comments
VLAN ID
External Connection Ports
Connection Automatic configuration
Information
physical LAN segment
Auto-configuration of VLAN
on external ports
Subnet address/subnet mask
Subnet information IP address to exclude
Default gateway
Network resource
-
type
Auto-configuration
VLAN IDs, connection ports,
of network devices
etc.
(L2 switches) (*5)
Devices" instead of re-executing LAN switch discovery.
Item
"5.5.2 Registering LAN Switches".
Admin LAN Network
Resources Directly
Connecting with
Manager
Yes
Yes
Yes
No
Yes (*1)
No
Yes (*2)
No
Yes (*3, *4)
Yes
Yes (*4)
No
No
- 81 -
Network
Network
Resources of
Resources of
Additionally
iSCSI or Public
Created Admin
LAN
Yes
Yes
Yes
No
Yes (*1) Yes (*1)
No
Yes (*2) Yes (*2)
No
Yes (*3)
Yes
Yes
No
No
LAN
Yes
Yes
Yes
No
No
No
Yes
Yes
Yes
No
Yes