Fujitsu ServerView Resource Orchestrator Cloud Edition V3.1.0 User Manual page 183

[KVM]
Enter up to 64 characters beginning with an alphanumeric character (upper or lower case), and including alphanumeric
characters (upper or lower case), underscores ("_"), or hyphens ("-").
[OVM for x86]
Enter the location using 32 characters or less.
[Solaris Zones]
Enter up to 52 characters beginning with an alphanumeric character (upper or lower case), and including alphanumeric
characters (upper or lower case), underscores ("_"), periods ("."), and hyphens ("-"). Enter up to 63 characters beginning
with an alphanumeric character (upper or lower case), and including alphanumeric characters (upper or lower case),
underscores ("_"), periods ("."), and hyphens ("-"). However, names which start with "SUNW" cannot be used.
The name "global" cannot be used when the configuration uses the same name for both a virtual L-Server and a VM. For
the configuration to use the same name for both a virtual L-Server and a VM machine, refer to
Specified in the Definition
Destination folder
Select a resource folder or a tenant to store L-Servers.
Template
Specify an L-Server template created in "Chapter 13 Creating L-Server Templates" in the "Setup Guide CE".
The L-Server template specified from the [Template List] tab is displayed. Check the specifications (CPU performance, memory
capacity, disk capacity (multiple)) for the L-Server to create.
-
For Physical
Model name, disk capacity (multiple) are displayed.
-
For Virtual
CPU performance, memory capacity, and disk capacity (multiple) are displayed.
[VMware] [Hyper-V]
When using templates with "all" specified for "ServerImageLink", all disks (system disk and data disks) are deployed as
they are in the cloning image.
To check the disk configuration of the L-Server to be created, check the cloning image in advance.
Image
Specify a cloning image to deploy.
Clicking <Select> displays the [Select a Cloning Image] dialog.
To manually install an operating system, select [None].
When [None] is selected, it is necessary to select the OS type on the [Server] tab.
When selecting [None], check the [Single path mode] checkbox of [FC path].
For details, refer to "16.2.2 [Server]
If you select [Deploy] from [Image deployment], the parameters for the operating system must also be specified.
For details on the items that must be set, refer to
Note
When creating an L-Server specifying a cloning image, if the OS of a cloning image is Linux, the L-Server is created using the
user name and password used when the cloning image was created.
It is recommended to change the password after creating an L-Server to maintain security.
When deploying cloning images, the OS image included in a cloning image is used, but the values of CPU, memory and network
are overwritten with the values used when creating an L-Server.
[VMware] [Hyper-V]
When using templates with "all" specified for "ServerImageLink", all disks are created in the same location.
File" of "17.8.1 Installation".
Tab" and "16.3.2 [Server]
"16.2.5 [OS]
- 167 -
Tab".
Tab" and "16.3.5 [OS] Tab".
"Table 17.4 List of Items