Canceling Collection Settings For Power Monitoring Environments; Changing Power Monitoring Devices - Fujitsu ServerView Resource Orchestrator Cloud Edition V3.1.0 User Manual

Polling interval (in minutes)
Enter the time interval of the data collection (1-6 or 10).
The number of devices that can be monitored simultaneously depends on the value of this polling interval and the load put on
the admin server. The following values are guidelines.
Table 7.2 Polling Interval
Polling Interval
5 minutes
10 minutes
Use a polling interval of 5 minutes or longer when monitoring chassis and servers. Use a polling interval of 10 minutes if
monitoring more than 40 devices.
Data storage period
Enter storage periods for each collection rate. Data older than the configured storage period will be deleted every day.
Enlarging data storage periods reduces the number of devices that can be monitored simultaneously.
Use the default storage period values when monitoring chassis and servers.
3.
Click <Apply>.
The new settings are applied.
Note
If the [Power] checkbox under [Data to collect] is cleared, the collection of power consumption data (including the calculation of hourly,
daily, and other summarized data) will not be performed anymore.

7.8.2 Canceling Collection Settings for Power Monitoring Environments

This section explains how to cancel the collection of power consumption data.
Use the following procedure to cancel the collection of power consumption data.
1.
Select [Tools]-[Options] from the ROR console menu.
The [Options] dialog is displayed.
2.
Click the [Environmental Data] category title, and modify the values for the following items in the displayed area.
Data to collect
Clear the [Power] checkbox.
3.
Click <Apply>.
Collection of environmental data is canceled.

7.8.3 Changing Power Monitoring Devices

This section explains how to change power monitoring device settings.
The following settings can be changed.
-
Device name
-
Admin LAN (IP address)
-
SNMP community name
-
Voltage
-
Comments
Complete setting modifications on the actual power monitoring device before performing this procedure.
Number of Devices that can be Monitored Simultaneously
Up to 40 devices
Up to 60 devices
- 85 -