Fujitsu ServerView Resource Orchestrator Cloud Edition V3.1.0 User Manual page 175

e.
Enter the disk information.
Disk
Enter the disk capacity, in units of GB.
Enter a number in the following range:
0.1 to 2048 (GB)
[Xen]
0.1 to 999.9 (GB)
[Solaris Zones]
0.1 to 9600 (GB)
Clicking <Add> adds a disk.
Enter the disk number.
[VMware]
A number between 0 and 55 can be specified.
[Hyper-V] [OVM for x86]
A number between 0 and 59 can be specified.
[Xen]
A number between 0 and 251 can be specified.
[RHEL-KVM]
A number between 0 and 16 can be specified.
[Solaris Zones]
0 can be specified.
Enter the disk information and click <Next>.
f.
Enter the information on server redundancy, alive monitoring, boot location, ServerImageLink, and FitDiskSizeToImage.
Redundancy
Select a server redundancy to be allocated to the L-Server.
Select "HA" when enabling redundancy.
Select "None" when not enabling redundancy.
[Xen] [RHEL-KVM]
Only "None" can be specified.
Alive monitoring
Configure alive monitoring as enabled or disabled.
This item can only be configured when "Redundancy" is enabled.
[Xen] [RHEL-KVM] [OVM for x86] [Solaris Zones]
The alive monitoring configuration is not displayed.
Boot Location
Decide whether the physical location of servers to be allocated to the L-Server can be changed.
This item can be configured when "VM" is selected for "Server Type" in the basic information.
Select "Fixed" when starting the L-Server on the same VM host that operated last time.
Select "AttachAtBoot" when automatically selecting the optimal VM host when the L-Server is started.
[Xen]
Only "Fixed" can be specified.
Repurpose
Specify whether to release the server allocated to the L-Server when the power is turned off.
Select "true" when releasing automatically.
- 159 -