Fujitsu ServerView Resource Orchestrator Cloud Edition V3.1.0 User Manual page 281
For infrastructure administrators (resource management) windows/linux
Hide thumbs
Also See for ServerView Resource Orchestrator Cloud Edition V3.1.0:
- User manual (247 pages)
Table of Contents
Advertisement
# /opt/FJSVrcvmr/bin/rcxadm netdevice set -name nd01 -attr auto_conf=true <RETURN>
-
When an infrastructure administrator is excluding the network device from auto-configuration
# /opt/FJSVrcvmr/bin/rcxadm netdevice set -name nd01 -attr auto_conf=false <RETURN>
You can confirm either of the following operations if the network device is the target of auto-configuration.
-
From the GUI:
1.
Select the target network device in the network device tree.
2.
Select the [Resource Details] tab.
3.
Refer to "auto-configuration" of "basic information" to confirm state of auto-configuration.
-
"true"
Indicates that the network device is the target of auto-configuration.
-
"false"
Indicates that the network device is not the target of auto-configuration.
-
Confirmation from the Command Line
Confirm if the network device is the target of auto-configuration using "AutoConfiguration" displayed in the display results of the
rcxadm netdevice show command.
-
"true"
Indicates that the network device is the target of auto-configuration.
-
"false"
Indicates that the network device is not the target of auto-configuration.
See
-
For details on the rcxadm netdevice command, refer to "3.8 rcxadm netdevice" in the "Reference Guide (Command/XML) CE".
-
For details on the rcxadm netconfig command, refer to "3.7 rcxadm netconfig" in the "Reference Guide (Command/XML) CE".
- 265 -
Advertisement
Table of Contents
