Fujitsu ServerView Resource Orchestrator Cloud Edition V3.1.0 User Manual page 77

1.
Stop the manager's cluster service.
Stop the manager's cluster service from the cluster administration view (Cluster Admin).
2.
Log in to the admin server's primary node.
Log in to the operating system of the admin server's primary node with administration privileges.
3.
Mount the shared disk on the primary node.
Mount the admin server's shared disk on the primary node.
4.
Change takeover the logical IP address.
Release PRIMECLUSTER GLS virtual interface settings from the PRIMECLUSTER resource, then change the PRIMECLUSTER
GLS configuration.
For details, refer to the PRIMECLUSTER Global Link Services manual.
5.
Activate the takeover logical IP address.
Use the PRIMECLUSTER GLS command-line to activate the takeover logical IP address.
For details, refer to the PRIMECLUSTER Global Link Services manual.
Settings for Clustered Manager Configurations
In a clustered manager configuration, use the following procedure to register an IP address as the manager's admin LAN IP address.
[Windows Manager]
1.
Cancel registry replication settings.
On the primary node, bring online the shared disk and IP address, and take all other resources offline.
Next, remove the following registry key from the registry replication settings set for the [PXE Services] cluster resource.
-
x64
SOFTWARE\Wow6432Node\Fujitsu\SystemcastWizard\DHCP
-
x86
SOFTWARE\Fujitsu\SystemcastWizard\DHCP
Use the following procedure to remove the registry key.
a.
In the [Failover Cluster Management] window, right-click the "PXE Services" resource in [Summary of RC-manager]-[Other
Resources], and select [Properties] from the popup menu.
The [PXE Services Properties] window will be displayed.
b.
In the [Registry Replication] tab, select the above registry key.
c.
Click <Remove>.
The selected key is removed from the [Root registry key] list.
d.
After removing the registry key, click <Apply>.
e.
Click <OK> to close the dialog.
2.
Change the manager IP address on the primary node.
On the primary node, use the rcxadm mgrctl modify command to set the new IP address.
Installation_folder \SVROR\Manager\bin\rcxadm" mgrctl modify -ip IP_address <RETURN>
>"
3.
Restore registry replication settings.
Restore the registry key deleted in step 1 to the registry replication settings of the [PXE Services] resource.
Use the following procedure to restore the registry key.
- 61 -