Fujitsu ServerView Resource Orchestrator Cloud Edition V3.1.0 User Manual page 365

Point
The "L-Platform Name" or "Server Name" displayed on the [L-Platform] tab may be set for the comment.
Detailed conditions other than the type and name can be specified during a search.
-
Tenant
To search only the resources in a certain tenant, specify the name of the tenant.
-
Status
To search only the resources which have a certain status, specify the target status.
Selecting a checkbox will show the resources whose status matches that of the selected checkbox.
However, when the following resource types are specified for search conditions, status cannot be specified.
-
L-Platform
-
Network Resources
-
Address Set
-
Cloning Image
When "All Resources" is selected in the [Resource Type] field and not even one checkbox is checked in the [Status] field, only the
following resources are searched:
-
L-Server
-
VM Host
-
Physical Server
-
Virtual Storage Resources
-
Disk Resources
-
network device
Point
Search Result Information is not refreshed when the checkbox is checked or cleared.
After the checking or clearing the checkbox, click [Search] again.
Search Result Information
Name
The name of the resource is displayed.
When the resource type is L-Platform or L-Server, the comment is displayed after the name.
When the link of the name is clicked, the [Resource Details] of the selected resource is displayed.
When the resource is a disk resource not displayed on the orchestration tree, when the link is clicked the [Resource Details] of the
storage pool or virtual storage resource which contains the selected disk is displayed.
Type
The type of the resource is displayed.
Status
The status of the resource is displayed.
- 349 -