Fujitsu ServerView Resource Orchestrator Cloud Edition V3.1.0 User Manual page 252

-
When disk configurations cannot be supported by an L-Server
-
When only Raw Device Mapping (RDM), a pass-through disk(Pass-through Disk), and a difference disk are included
-
When a configuration including device paths which are not described, Raw Device Mapping(RDM), a path through disk (Pass-through
Disk), or difference disks are included
-
When the non-global zone of Solaris containers is not managed using BMC BladeLogic Server Automation [Solaris Zones]
-
In the case of the non-global zone of Solaris 11 [Solaris Zones]
-
In the case of OVM for SPARC virtual machines [OVM for SPARC]
For the following cases, it will be the L-Server for server and storage operation.
-
When using storage listed in
machine are found in the following list
[VMware]
-
SCSI:0:1 - SCSI:0:6
-
SCSI:0:8 - SCSI:0:14
-
SCSI:1:0 - SCSI:1:6
-
SCSI:1:8 - SCSI:1:14 AM
-
SCSI:2:0 - SCSI:2:6
-
SCSI:2:8 - SCSI:2:14 AM
-
SCSI:3:0 - SCSI:3:6
-
SCSI:3:8 - SCSI:3:14 AM
[Hyper-V]
-
SCSI:0:1 - SCSI:0:14
-
SCSI:1:0 - SCSI:1:14 AM
-
SCSI:2:0 - SCSI:2:14 AM
-
SCSI:3:0 - SCSI:3:14 AM
For virtual machines on VM host of VMware which is not managed by VM management software, power operations (starting,
stopping or restarting) and modification of basic information (label/comment configurations) can be performed.
*2: In the following cases, only power control (starting, stopping, and restarting) of L-Servers is possible from the ROR console.
-
When the non-global zone of Solaris Zones is not managed using BMC BladeLogic Server Automation
-
In the case of a Solaris 11 non-global zone created in Solaris Zones
-
In the case of OVM for SPARC virtual machines
*3: Datastores must be installed on a shared disk.
*4: When CPU performance and memory size have been specified, the settings cannot be changed into "Unlimited".
*5: Solaris Zones are not supported. [Solaris Zones]
*6: For system disks, use SCSI:0:0 [VMware] or IDE:0:0 [Hyper-V]. If SCSI:0:0 [VMware] or IDE:0:0 [Hyper-V] is not used for the
system disk, the L-Server creation process that accompanies cloning image deployment may fail. For Hyper-V, datastore must be installed
on a shared disk.
[VMware]
When the virtual machine linked to the target L-Server includes Raw Device Mapping (RDM) disks, the target disks are treated as virtual
disks and the image will be collected.
[Hyper-V]
When the virtual machine lined to the target L-Server includes Pass-through Disks, images cannot be collected.
When the virtual machine linked to the target L-Server includes difference disks, the image will be collected with the difference disks
included.
"18.3.3 Manageable Storage", and the device paths for all disks that have been allocated to the virtual
- 236 -