Increasing Disk Capacity - Fujitsu ServerView Resource Orchestrator Cloud Edition V3.1.0 User Manual

Note
When resources have not been allocated (preserved) or have been allocated (allocated) to the L-Server, only the network resources of
physical L-Servers can be modified.
For Physical L-Servers
1.
Right-click the target L-Server in the orchestration tree, and select [Change Settings]-[Network Configuration] from the popup
menu.
The [Change network configuration of an L-Server] dialog is displayed.
2.
Enter the following items:
NICs
Clicking <Add> adds a network.
Select a network resource to connect with in the [Add a Network] dialog.
Information
- When adding a new NIC or NIC group, select the number of "(Undefined)" for [NIC] in the [Add a Network] dialog. When
performing redundancy for the NIC, select the pair of NICs to use.
- When adding an already defined NIC or a network to connect with the NIC group, select the number of defined NICs for
[NIC] in the [Add a Network] dialog.
Clicking <Delete> deletes the selected network.
If the number is not the NIC number specified when creating an L-Server, <OK> is not activated. When <OK> is not activated,
click <Add> to configure undefined NICs.
Network
Click <Change> to select a network resource that is connected to a NIC or a NIC group.
IP address
Enter an IP address to set for the L-Server. If the IP address is not entered, an IP address is automatically allocated to the L-
Server.
Untagged VLAN
Select whether or not to use untagged VLAN for a NIC or a NIC group.
3.
Click <OK>.
From the command-line, execute rcxadm lserver modify.
For details on the rcxadm lserver modify command, refer to "3.6 rcxadm lserver" in the "Reference Guide (Command/XML) CE".
For Virtual L-Servers
Use the rcxadm lserver attach and detach commands for adding and deleting NICs.
For details on the rcxadm lserver attach command, refer to "3.6 rcxadm lserver" in the "Reference Guide (Command/XML) CE".

17.2.6 Increasing Disk Capacity

This section explains how to increase the capacity of disks allocated to L-Servers.
Prerequisites
-
It is only possible to increase disk capacity when the VM type is VMware, or the target is a Hyper-V virtual L-Server.
- 209 -