Fujitsu ServerView Resource Orchestrator Cloud Edition V3.1.0 User Manual page 221
For infrastructure administrators (resource management) windows/linux
Hide thumbs
Also See for ServerView Resource Orchestrator Cloud Edition V3.1.0:
- User manual (247 pages)
Table of Contents
Advertisement
-
When the snapshots are collected from a virtual L-Server on Hyper-V, detached disk resources cannot be saved.
From the command-line, execute rcxadm lserver detach.
To detach a disk from an L-Server while the power of the L-Server is on, specify the -online option command.
For details on the rcxadm lserver detach command, refer to "3.6 rcxadm lserver" in the "Reference Guide (Command/XML) CE".
[Hyper-V]
When changing the configuration, a maximum of up to four disks can be specified at one time.
To perform addition of five or more disks, please perform an additional configuration change.
Information
-
When not deleting detached disks from virtual storage when detaching them, the L-Server can be connected with the same operations
as the LUNs that were detached in advance.
-
When not deleting detached disks from virtual storage when detaching them, use the following procedure to delete the disk resources:
1.
Connect the disk resource to the L-Server.
2.
Select "Yes" in "Detach Selections disks" when detaching disks.
Otherwise, delete the L-Server.
Note
Immediately after a snapshot is restored, there may be differences between the configuration of VM guests managed by L-Server and
those managed by VM management software.
The differences in VM guest configuration are reflected on the configuration of the L-Server by periodic queries made to the VM
management software.
For details on reflection of L-Server configuration by periodic queries, refer to
If the disk configuration of a virtual machine is modified using VM management software, attaching and detaching disks to and from
virtual L-Servers will be disabled.
[VMware]
-
When changed to use a device path other than the following:
-
SCSI:0:0 - SCSI:0:6
-
SCSI:0:8 - SCSI:0:14
-
SCSI:1:0 - SCSI:1:6
-
SCSI:1:8 - SCSI:1:14 AM
-
SCSI:2:0 - SCSI:2:6
-
SCSI:2:8 - SCSI:2:14 AM
-
SCSI:3:0 - SCSI:3:6
-
SCSI:3:8 - SCSI:3:14 AM
-
When changed to use Raw Device Mapping
[Hyper-V]
-
When changed to use a device path other than the following:
-
IDE:0:0
-
SCSI:0:1 - SCSI:0:14
-
SCSI:1:0 - SCSI:1:14 AM
-
SCSI:2:0 - SCSI:2:14 AM
"17.2
Modifying".
- 205 -
Advertisement
Table of Contents
