Chapter 23 Network Resource Operations; Automatic Network Configuration - Fujitsu ServerView Resource Orchestrator Cloud Edition V3.1.0 User Manual

Chapter 23 Network Resource Operations

This chapter explains how to operate network resources.

23.1 Automatic Network Configuration

Automatic network configuration is normally performed when creating an L-Server for the first time, but it can also be performed
beforehand.
By performing it beforehand, the creation of an initial L-Server can be made faster.
Automatic network configuration is performed as follows:
1.
Select the target network resource on the orchestration tree, and then select [Automatic Network Configuration] from [Operation]
of the ROR console menu.
Or, right click the target network resource and select [Automatic Network Configuration] on the displayed menu.
The [Automatic Network Configuration] dialog is displayed.
2.
Select the [By Cluster] or [By VM Host] radio button from [Scope for Automatic Setting].
The cluster or VM host list to be automatically configured is displayed on the resource list.
3.
Select the cluster or VM host on which network automatic configuration is to be performed by selecting the [Select] checkbox, or
select all the clusters or VM hosts displayed in the resource list by selecting [Select all].
4.
Click <OK>.
Automatic network configuration is performed.
- 266 -