Fujitsu ServerView Resource Orchestrator Cloud Edition V3.1.0 User Manual page 116

-
When saving a file in CSV format from the system configuration template, or exporting a system configuration file from the ROR
console
Export will be performed using the latest file format given in
The following operations, usually performed from the ROR console, can be equally performed using the pre-configuration function.
-
Registration
-
"5.1 Registering VIOM
-
"5.4 When Using Blade
-
"5.5.2 Registering LAN
-
"5.2 Registering VM Management
-
"5.10 Registering Power Monitoring
-
"5.11 Registering Admin LAN
-
"5.4.4 Configuring VLANs on LAN
-
"5.5.3 HBA address rename
-
"Chapter 8 Configuring Monitoring Information" in the "Setup Guide VE"
-
"Chapter 18 Server Switchover Settings" in the "User's Guide VE"
-
Modification
-
"6.1 Changing Admin IP
-
"7.1.11 Changing Admin LAN
-
"7.1.2 Changing Server
-
"7.1.3 Changing Admin IP
-
"7.1.4 Changing SNMP
-
"7.1.5 Changing Server Management Unit Configuration
-
"7.1.7 Changing VM Host Login Account
-
"7.1.8 Changing the VLAN Settings of LAN Switch
-
"7.1.9 Changing HBA address rename
-
"7.1.10 Changing Boot
-
"7.3 Changing VIOM Registration
-
"7.4 Changing LAN Switch
-
"7.7 Changing VM Management Software
-
"7.8 Changing Power Monitoring Environment
-
"7.9 Changing Monitoring Information
-
"18.3 Changing Server Switchover Settings" in the "User's Guide VE"
*1: To start collecting environment data, the collection settings should be manually set from the ROR console's option dialog.
*2: Restart all the managed servers that were either registered or modified following an import operation.
*3: The pre-configuration's scope of configuration is the same as that of the ROR console.
Moreover, the pre-configuration function can perform the same labels and comments settings as those available in BladeViewer. Those
settings are described in "Chapter 4
Coordination"
Servers"
Switches"
Software"
Devices" (*1)
Subnets"
Switches"
Settings" (*2)
Addresses" (*3)
Subnets"
Names"
Addresses" (*3)
Communities"
Information"
Settings" (*2)
Options"
Settings"
Settings"
Settings"
Settings"
Settings"
BladeViewer" and "4.5.1 Listing and Editing of Labels and
"B.2 File Format".
Settings"
Blades"
- 100 -
Comments".