When specifying these items as search conditions, connected shared disks can be filtered. For details, refer to
Attaching Shared Disks
Use the following procedure to attach disk resources to L-Servers created in advance and to share the disks:
-
Attaching shared disks to the first L-Server
To attach disks, use the procedure of "Attach new disks" in
-
Attaching disks to share for a second (or later) L-Server
To attach disks, use the procedure of "Attach new disks" in
-
Select the disk to allocate to the L-Server.
-
Select "Allocated" for "Allocation Status".
-
Select the first L-Server to which the shared disks have been attached as the "Allocated L-Server".
When specifying these items as search conditions, connected shared disks can be filtered. For details, refer to
17.2.5 Modifying Network Resource Settings
This section explains how to modify network resource settings.
The following items can be modified.
Table 17.3 Network Resource Items for Modification
Operation
IP address change
(Admin LAN/public LAN) (*1)
Changing network resources to
connect to a NIC or a NIC group
NIC addition and deletion
Changing untagged VLAN
settings (use/not use)
Adding or deleting network
resources to connect to a NIC or
a NIC group
Redundancy modification
(Example: Changing the
combination of NIC1 and 2 to
NIC3 and 4)
Redundancy addition
(Example: Changing NIC1 to
the combination of NIC1 and 2)
Redundancy deletion
"17.2.3 Attaching and Detaching
"17.2.3 Attaching and Detaching
Physical L-Server
Define
Preserved
Allocated
d
Yes
Yes
Yes
Yes
Yes
-
Yes
Yes
Yes
Yes
Yes
Yes (*3)
Yes (*3)
Yes
Yes (*3)
Yes (*3)
Yes
Yes (*3)
Yes (*3)
L-Server Status
Physical L-
Server
(iSCSI Boot)
All
Yes
Yes
Yes
-
-
-
Yes
-
Yes
-
-
-
-
- 207 -
"16.2.3 [Disk]
Disks".
Disks". In this case, select the following:
"16.2.3 [Disk]
Virtual L-Server
Define
Preserved
Allocated
d
Yes
-
(*2)
Yes
-
(*2)
Yes
(*2,
Yes (*5)
Yes (*5)
*4)
-
-
-
-
-
-
-
-
-
-
Tab".
Tab".
-
-
-
-
-
-
-
Need help?
Do you have a question about the ServerView Resource Orchestrator Cloud Edition V3.1.0 and is the answer not in the manual?
Questions and answers