Cloning Image Operations; Collecting And Registering - Fujitsu ServerView Resource Orchestrator Cloud Edition V3.1.0 User Manual

Note
-
When deleting an L-Server, log off from the ETERNUSmgr of ETERNUS storage registered on ESC.
-
When operating NetApp storage in cluster environments and operating a partial system due to system trouble, recover the NetApp
storage and return the system to cluster operation before re-commencing operations.
-
When the disk resource is a LUN created in advance, a LUN for iSCSI boot, or a disk resource for virtual L-Servers, it is recommended
to delete the data on the disk, as the data is not deleted when deleting the L-Server to which the disk resource is allocated. For details
on how to delete data on the disks, refer to the cautionary notes of
-
If they are disk resources that were created with dynamic LUN mirroring, the disk resources on the local site and on the remote site
are deleted simultaneously when the L-Server is deleted.
-
When deleting a virtual L-Server, the target L-Server will enter unknown status, and a warning message may be displayed. When the
L-Server has been deleted, the warning message will disappear, so no corrective action is necessary.
From the command-line, execute rcxadm lserver delete.
For details on the rcxadm lserver delete command, refer to "3.6 rcxadm lserver" in the "Reference Guide (Command/XML) CE".

17.5 Cloning Image Operations

This section explains how to collect and delete cloning images.

17.5.1 Collecting and Registering

This section explains how to collect cloning images.
Use the following methods to collect cloning images:
-
Collecting Cloning Images from L-Servers with an OS Installed
-
Collect cloning images from templates of server virtualization software
-
Registering the Server Management Software (BMC BladeLogic Server Automation) Package
Note
For physical L-Servers, agents must be registered before collecting cloning images.
For details, refer to "B.6 Collecting and Registering Cloning Images" in the "Setup Guide CE".
Use the following method to collect cloning images:
Collecting Cloning Images from L-Servers with an OS Installed
1.
After installing an OS, right-click the target L-Server in the orchestration tree, and select [Cloning]-[Collect] from the popup menu.
The [Collect a Cloning Image] dialog is displayed.
2.
To use this feature, the following settings must first be defined:
Note
-
For physical L-Servers, the target L-Server must be operating when cloning images are being collected.
-
Cloning images cannot be collected from a physical L-Server on which a VM host has been installed.
-
For virtual L-Servers, the target L-Server must be stopped when cloning images are being collected.
"14.5 Storage Resources".
- 213 -