Fujitsu ServerView Resource Orchestrator Cloud Edition V3.1.0 User Manual page 374

PRIMEQUEST Chassis Management Data
-
Section Name
Enter [PRIMERGYPartitionModelChassis] as the section name.
-
Section Header
operation
Enter the desired operation for the current line. Enter a hyphen ("-") to skip this line.
chassis_name
Enter the name that will be used to identify the chassis.
Enter a character string beginning with an alphabetical character and containing up to 10 alphanumeric characters and hyphens
("-").
Note
Chassis names should be unique between all chassis.
Names are not case-sensitive.
ip_address
Enter the same IP address as that set on the management board.
Enter a string of numeric values (between 0 and 255) and periods.
Note
IP addresses should be unique between all resources.
snmp_community_name
Enter the same SNMP community (read-write permission) as that set on the management board.
Enter a string of up to 32 alphanumeric characters, underscores ("_"), and hyphens ("-").
mgmt_user_name
Enter the name of a remote server management user account with administrative privileges.
This user name must be between 8 and 16 alphanumeric characters long.
mgmt_passwd
Enter the password of the remote server management account.
This password must be between 8 and 16 alphanumeric characters long.
mgmt_passwd_enc
Enter one of the following.
-
If mgmt_passwd is plain text
"plain"
-
If the password is encrypted
"encrypted"
SPARC Enterprise M4000/M5000/M8000/M9000 Chassis Management Data
-
Section Name
Enter [SPARCEnterprisePartitionModelChassis] as the section name.
- 358 -